What are the steps for the installation of calcium silicate tubes

Calcium silicate pipes will be widely used in buildings, and when installing such materials, they also need to be constructed by professionals in order to ensure the safety and regularity of the installation. In the installation, the main points of operation are as follows:

Step 1: Positioning

First of all, if we want to install this kind of material, we need to locate the bullet line first, that is to say, according to the design requirements, we need to locate the bullet line at the installation site, so as to locate the precise fixed installation location, so as to avoid the situation of position offset and inaccuracy when installing.

Step 2: keel

Before installing the Calcium silicate shell, it is necessary to install the embedded parts, suspenders, keels and other items one by one. Only in this way can this kind of material be better installed in the next. It should be noted that the installation of the embedded parts also has a very standard distance and depth requirements. After installation, comprehensive correction should be carried out to ensure that the location and level are not available. There are deviations, all of which need to be done one by one during the construction. Only in this way can the next installation be completed.

Step 3: Installation

After the embedded parts, the main keel, the middle keel and the small keel have been installed, the formal installation of the Calcium silicate shell will be carried out. When installing, attention should be paid to the non-placement of other materials on the board, and when installing, attention should be paid to leaving a joint for the installation of the board. If the humidity in the room is relatively high, it will not be able to install directly. It is necessary to wait until the humidity is low to install, so as to ensure that the effect of the installation is ideal, otherwise the effect may be affected.